Ubiquitous hand disinfection is a sign of our times. Our esoteric atomizers were created in response to the need to adapt businesses to sanitary procedures. Stand for automatic hand disinfection with a motion sensor is an ideal solution for all places where people meet. This solution eliminates the risk of transmission of viruses and bacteria on the hands, as it can be done when using a classic mechanical dispenser.

SH2 ATOMIZER

* After putting your hands into the dispensing area, the disinfectant is dispensed in the form of a mist.
* Tank has a capacity of 1.2 l which allows approximately 1600 doses of liquid. The liquid is dispensed for about 2-3 seconds.
* The disinfecting liquid tank is easily refilled. Make sure you refill with liquid disinfectant – not gel!
* SH2 can be placed on the counter or hung on the wall. Powered by 12 V our Disinfection Station is always ready to use but also easy to maintain.
Please let us know in case you wish to make a purchase.

Please send your enquiries to : ENQUIRY@ATSDISPLAY.COM or write to us using contact form. PRE-PAID ONLY

SFSDS01 – Freestanding Disinfecting Station

The standing FSDS1 disinfection station is powered by a 230 V power supply – the power cord socket is located on the back of the device.
The FSDS1 disinfection station is equipped with a liquid container with a capacity of 1.2 liters, which provides up to 1600 dosing of the liquid with one filling.
The fluid dispenser is activated automatically when movement is detected under the sensor. Fluid is dispensed for about 2-3 seconds.
Blue light flashes when the liquid is dispensed
Practical rubbish bin inside of the device
Technical data of the standing disinfection station:

Overall dimensions: 350x325x1270mm

Net weight: 27,5 kg

Gross weight: ~30,5kg + paleta* 600×400 mm

Only liquid disinfectant (not gel!) may be used !

Please send your enquiries to : ENQUIRY@ATSDISPLAY.COM or write to us using contact form. PRE-PAID ONLY!

FSDS02 – Battery Powered Freestanding Disinfecting Station

The standing FSDS2 disinfection station is powered by a 230 V power supply and additionally has a battery power supply – it can operate without power connection after prior charging the battery, the set includes a charger.
The power cord socket is located at the back of the device.
The FSDS2 disinfection station is equipped with a liquid container with a capacity of 1.2 liters, which provides up to 1600 dosing of the liquid with one filling.
The fluid dispenser is activated automatically when movement is detected under the sensor. Fluid is dispensed for about 2-3 seconds.
Blue light flashes when the liquid is dispensed
Technical data of the standing disinfection station:

Dimensions: 350 x 325 x 1270mm

Net weight: 37.8 kg

Gross weight: ~ 41.8 kg + pallet * 600x400mm

Only liquid disinfectant (not gel!) may be used!

Please send your enquiries to : ENQUIRY@ATSDISPLAY.COM or write to us using contact form. PRE-PAID ONLY!

CP421 – Free Standing Contactless Disinfecting Station

The dispenser operates on a battery which eliminates the need for electricity connection
The correct preparation of the atomizer for use is indicated by a flashing green LED
The disinfectant tank has a capacity of 1 liter
Cleaning and maintenance of the device is extremely simple and quick, which guarantees efficient preparation of the device for operation

Only liquid disinfectant (not gel!) may be used!

Please send your enquiries to : ENQUIRY@ATSDISPLAY.COM or write to us using contact form. PRE-PAID ONLY!

CP420 – CONTACTLESS BODY TEMPERATURE CHECK AND HAND DISINFECTION

Fast and efficient temperature measurement with a non-contact infrared thermometer. The measurement takes only 1 second! The height at which it is located can be easily adjusted thanks to a simple adjustment mechanism.
The station is equipped with an atomizer that sprays a disinfectant in the form of a mist, thanks to which there are no stains or dirt on the clothes.
The disinfectant tank has a capacity of 1 liter.
The excess disinfectant that collects under the dispensing nozzle can be easily removed by emptying the bowl. Such a fluid delivery system ensures its effective and economical dosing.
The dispenser works by means of a battery, which gives you freedom in the location of the station.
The correct preparation of the atomizer for use is indicated by a flashing green LED.
Cleaning and maintenance of the device is extremely simple and quick, which guarantees efficient preparation of the device for operation.
Dimensions:

Height: 1650 mm at the highest position of the thermometer

Width: 290 mm

Weight: 14 kg

Batteries included with the device.

Only liquid disinfectant (not gel!) may be used!

Please send your enquiries to : ENQUIRY@ATSDISPLAY.COM or write to us using contact form. PRE-PAID ONLY!